Stamp-Box hardware platform for building mobile robots and controlling motors and sensors

Description:

• Uses i-Stamp as the main microcontroller
• 16 KB memory. Separate 8 of 2KB page and can access to work together.
• Write-erase memory reliably up to 100,000 times
• Two DC motor drivers including status indicators to show motor direction
• 3 RC servo motor connectors
• 8-ch. Analog connector with a 10-bit A/D converter that can accept up to +5V.
• 7-ch. Digital input/output port connector
• Piezo Speaker
• RS-232 Serial port for downloading and communication (UCON-232S USB to Serial converter required if using with USB port, sold seperately)
• Uses PBasic 2.5 programming environment
• Uses 4 AA batteries and supports both Alcaline and Rechargeable batteries (recommended 1500mAH or higher), batteries not included
• Small size : 2.75x2.50x1.75 Inches
• Interfaces with many other modules and application boards such as : SRF04/05/08/10 Ultrasonic ranger, CMPS03 Digital compass sensor, iV-CAM/CMUcam1 CCD image tracking, SHT11 Humidity sensor, Memsic2125/H48C Accellerometer sensor, SLCD16x2 the serial LCD 16x2, ZX-17 Serial Real time clock, ZX-19 Sound smart board, ZX-44 the 4x4 Matrix switch board, ZX-Tilt 2-outputs Tilt sensor, ZX-SOUND the Sound detector board, ZX-SERVO16 Serial servo controller board, ESD02 Embeded Bluetooth module, GP2D120/GP2D12 distance sensor and many types of analog sensor modules.

Download:
Stamp-Box manual