Arduino compatible POP-BOT robot kit

The POP-BOT is the first of its kind with Arduino compatible features packed into a mobile robotic platform. It comes complete with wheels, motors, sensors, software, other hardware and documentation.

The POP-BOT is a complete, low-cost development platform designed for those interested in learning and using Arduino POP-168 modules in robotic applications. Its compact size, convenient features and low price make it an ideal tool for the student and educator.

If you like the Arduino programming platform, you will love the POP-BOT. The POP-BOT mcu comes in 2 parts, the POP168 Module and the RBX168 board power module.

POP-168 Module Feature Summary:

1. ATmega168 on board with 10-bit ADC converter, 16KB of flash program memory, 512-byte EEPROM, 1KB RAM, 16MHz clock
2. Built-in RS-232 interface for communication
3. Immediate code upload with the built-in Bootloader
4. Reset Button for reset capability
5. Small Form Factor for compact size development
6. ISP port for programming with the PX-400/PX-4000 device
7. SMD Leds for indications
8. Fully compatible with the Ardruino Project
9. 16 I/O pin assignment compatible i-Stamp/i-Stamp2P24 module
10. Supply voltage range +3.3 to +5V 50mA

RBX-168 Power Module Feature Summary:

1. Screw terminal block for battery connections. It supports +4.8 to +12Vdc and has an on-board power switch.
2. +5Vdc switching regulator power supply circuit. It provides a regulated supply voltage for the POP-168 module and all sensor ports.
3. 2 User push button switches with indicator LEDs.
4. 5 Universal ports supporting Analogue input functions and Digital input/output functions.
5. 2 Analogue only input ports.
6. I2C bus port.
7. RS-232 serial port interfacing.
8. 2 Channel DC motor drivers with indicators. Supports motor voltages from 2.5Vdc to 13.5Vdc.
9. 2 Digital servo motor outputs.
10. Piezoelectric speaker.

What's in the box:

1. POP-168 The Arduino-mini compatible micro controller module
2. RBX-168 Robot controller board with 4-AA battery holder. (Batteries not included)
3. Switch input board with JST cable (2 sets).
4. Infra-red Reflector board with JST cable (2 sets).
5. GP2D120 Infra-red distance sensor with JST cable.
6. Serial LCD 16 characters 2 lines module with LED back light with Cable.
7. 48:1 ratio 4.5V DC motor gearbox with IDC cable. (2 sets)
8. Standard servo motor. (Operating voltage is 4.8 to 7.2Vdc)
9. Circle wheel and Tread rubber wheel set with 2mm tapped-screw. (2 sets)
10. 80x60 cm and 80x80 cm Plastic Grid plate set. (2 sets)
11. Circle base with free ball wheel.
12. 60 piece plastic joiner and 12 piece strip joiner set.
13. 12 piece right-angled metal bracket set.
14. Nut and Screw set.
15. Line tracking demo paper sheet.
16. UCON-4 USB to serial converter cable for downloading and communication.
17. CD-ROM contains software tools, source code and documentation.

The Arduino POP-168 module's hardware is compatible with the Arduino-mini. (www.arduino.cc/en)

Go here to see about installing the latest version of the Arduino software.